Thursday, June 12, 2014

PES Smoke Patch GOLD 6.2 released!


Finally the long awaited update of the Smoke Patch is released. Please go through this post very carefully before installing the patch.
Follow these instructions strictly :




1. As the patch is a full version, it doesn't need previous updates.

2. Make sure you have a clean copy of PES 2014 with data pack 2 installed (compulsory OR Download from the links below & install).
              **while installing Datapack from the link above, there will be a 2D league installer                   automatically opened after the installation of datapack, Please IGNORE that.


3. Download all 10 parts of v6.2 from download links below and extract them to a folder; password is : smoke

4. Then, run SMoKE Patch 2014 v6.2 as administrator.

5. Select your "Pro Evolution Soccer 2014" folder anywhere on your PC.

6. Then click next and start.

7. The installer may have some  "Not responding" errors for few seconds, leave and let it respond itself. (on low specifications PC's mostly)

8. After final page is displayed, click exit.

9. Run SMoKE Datapack v6.2 as admin (IT MAY TAKE SOME Minutes TO OPEN)

10. Click next, and start.

11. Again, the installer may not respond some seconds, leave it (for more than 10-15 mins)
12. After end page is displayed, click exit.

13. Run SMoKE 2d Final v6.2 as admin.

14. Select your desirable league, also NO 2d option is added.

15. Click i agree and next.

16. **Make sure you select your "Pro Evolution Soccer 2014" folder **

17. After installing everything correctly, run pes2014.exe as admin.

SMoKE Team 2014
Version 6.2


DOWNLOAD:


Part 1: http://adf.ly/qZhBm

Part 2: http://adf.ly/qZhEJ


Part 3: http://adf.ly/qZhGO

Part 4: http://adf.ly/qZhJM

Part 5: http://adf.ly/qZhMY


Part 6: http://adf.ly/qZhP7

Part 7: http://adf.ly/qZhRg

Part 8: http://adf.ly/qZhTm

Part 9: http://adf.ly/qZhWd

Part 10: http://adf.ly/qZhZ1


Data pack 2:
(this datapack 2 has a 2D league installer, please ignore that one, the new 2D league installer is in the above patch 6.2)



NOTE: 

1. After downloading these 10 parts, please extract them to a single folder. You'll see three different installers "SMoKE Patch v6.2", "SMoKE Datapack v6.2" and "SMoKE 2D installer v6.2".

2. The "SMoKE Datapack v6.2" and "SMoKE Datapack 2.00" are two different datapacks. You have to install both, First datapack 2.00, and then Datapack v6.2.

3. We're releasing this patch in a hurry, so we couldn't have a sufficient number of BETA test reports. If any errors are found, please do not hesitate to report, we will make small "Hot-fix" updates within the same day.

4. Here's a link to the CREDITS page, and DONATE page.

5. Scoreboard installer will be available very soon.


46 comments:

  1. After installing 6.2 exe patch it says did not install as cannot create the following file: \smoke\gold win_dat\common\series\final 6.2 ect\teamcolour.$$A\smoke\pes14 any idea?

    ReplyDelete
    Replies
    1. It's an error of the installer itself. Please try re-installing everything once.

      Delete
    2. Hi I have the same error.

      How do i solve it?

      Delete
  2. Seems to be running OK. Pato has been at Sao Paulo since February with Jadson going the other way to Corinthians.....both still at their old teams.

    ReplyDelete
    Replies
    1. it's fine now?
      you can do the transfers yourself too, in case they're missed. :)

      Delete
  3. Looks OK, still same error after re-installing but tried running game exe and loaded OK and played OK. Still not sure if the error on installing has effected any thing.

    ReplyDelete
  4. I have the same issue try to reinstall but its still the same. The game can be run but epl team its not available. Any way to fix it? Thanks

    ReplyDelete
    Replies
    1. To all the guys who have the problem of not having all the leagues
      here is a simple solution:
      install the patch and the datapacks and the 2d installer at any order (it doesn't matter)
      after you finish intallation go to this directory inside your pes 2014 folder "\SMoKE\pes14_win_dat\common\etc\pesdb"
      and then delete the file named "CompetitionEntry.bin"
      now run the game and you will find all the leagues in your game
      I have done this several times and it worked !!

      Delete
  5. How do you get the english teams through this? only got the german league with ireland as the teams haha

    ReplyDelete
  6. instalei tudo de acordo com as vossas indicacões..quando abro o jogo como administrador não aparece estas ligas:liga inglesa, liga francesa, liga italiana, liga holandesa, liga espanhola e liga portuguesa..o instalador da liga 2d diz que foi instalado, mas não aparece a liga instalada.gostaria de saber como reslover isto...obrigado!!!

    ReplyDelete
  7. Tried reinstalling a few times, eep getting "Cannot create the following file: \SMOKE\GOLD Series\Final 6.2\SMoKE\pes14_win_dat\common\etc\TeamColor.$$A" error.

    The install will start but as people said above the English and other leagues are missing.

    I'm on Win 7 64 bit.

    ReplyDelete
    Replies
    1. oi,tambem estava a ter este problema,mas podes seguir estas dicas que pode ajudar...
      1-instala o pes 2014 de novo
      2- instala data pack 2.,
      3-instala data pack 6.2 ,mas não instala a liga 2d dos data pack
      4-instala patch 6.2..depois de instalado da este erro:Não é possível criar o seguinte arquivo: \ FUMAÇA \ Série Ouro \ final 6.2 \ SMoKE \ pes14_win_dat \ common \ etc \ TeamColor $ $ A". Erro
      5-finaliza a instalação e abra o jogo como administrador e veja si estão todas as ligas instalado,mas pode ter nomes falsos dos jogadores na liga alemanha e equipas classicas.
      6-para corrigir estes nomes falsos,..instala a liga 2d 6.2 que queres dentro da pasta save ,que fica na pasta konami nos meus documemtos...finaliza a instalação..
      7-agora abra o jogo como administrador e veja si ficou tudo bem..foi assim que eu consegui...espero ter ajudado!!!!

      Delete
  8. Hi, I'm getting the same error as mentioned above after I followed the instructions to install the patch. I think it may have something to do with the error that is causing the issues with the Emglish and other European leagues

    ReplyDelete
  9. do i need to install patch 1.12 and 1.13 before install?

    ReplyDelete
  10. This comment has been removed by the author.

    ReplyDelete
  11. Everything installed according to your notes .. but when I open the game as an administrator: There appears THESE leagues: English Premier League, French League, Italian League, Dutch League, Spanish League and Portuguese .. install the installer of league 2d Says that was installed, but the league appears 2d installed. Listing added the stadiums will not appear on the smoke .. I wonder How reslover This or the error is in Smoke Patch 6.2 GOLD ... Thanks!

    ReplyDelete
  12. everything working fine with jenkey loader 1.0.2.9,sweetfx and pes2014fullsettings with frame skipping and vsync

    ReplyDelete
  13. I must commend the efforts you guys are putting into making pes2014 a good game.
    Please do I need to install version 6.1 b4 this one? Or should I just install this on a clean copy of pes2014. I am asking because I have installed this version 6.2 on a clean version of pes2014 but the game appears to be slow despite adjusting the speed with the fileloader. Coetrao still has no head. Lol. Asides the game being a bit slow and the file loader not adjusting the speed, I think I have no other issues.

    ReplyDelete
  14. I just installed the patch and I have some problems. Only a few leagues are showing up, having even fewer teams inside. Only Bundesliga shows up correctly and the National Teams. And when I pick teams the game crashes please help me Smoke Team..!!

    ReplyDelete
    Replies
    1. hi, I was also having this problem, but you can follow these tips that can help ...
      1-install pes 2014 new
      2 - install data pack 2.
      3-install data pack 6.2, but installs league of 2d data pack
      4-install patch 6.2 .. after installation of this error: Can not create the following file: \ SMOKE \ Gold Series \ Final 6.2 \ SMoKE \ pes14_win_dat \ common \ etc \ TeamColor $ $ The "error.
      5-completes the installation and start the game as an administrator and see each other all leagues are installed, but can have false names of the players in the league germany and classical teams.
      6-to correct these false names .. 2d 6.2 installs the league you want to save into the folder, which is on the konami folder in my documemtos ... finish the installation ..
      7 now open the game as administrator and see itself was okay .. that's how I got ... I have helped.!

      Delete
    2. thank you very much my friend, I will try this and I'll tell you if it worked :)

      Delete
    3. Hello again my friend, i tried it like you said and now it starts the game correctly so thank you very much.
      One last problem though, is that most of the leagues are missing still...do you have any other ideas :/ ?

      Delete
  15. Hey, is there a way to be able to use File Loader? Plus San Siro has graphical issues with the edges of the field. Really annoying to play there. Thanks in advance

    ReplyDelete
  16. instal Smoke Datapack first then patch,and put jenkey loader 1.0.2.9 in game folder

    ReplyDelete
  17. campionato master ogni partita della juventus si blocca tutto e si chiude tutto come nella versione 6.1 è bruttissimo

    ReplyDelete
  18. I have the Steam version of PES 2014. Will there be a duplicate copy?

    ReplyDelete
  19. I have download all of part but i don't lnow to extract the file, pls tell me about it

    ReplyDelete
  20. it works for me normaly..........thx

    ReplyDelete
  21. still no main league except bundesliga

    ReplyDelete
  22. To all the guys who have the problem of not having all the leagues
    here is a simple solution:
    install the patch and the datapacks and the 2d installer at any order (it doesn't matter)
    after you finish intallation go to this directory inside your pes 2014 folder "\SMoKE\pes14_win_dat\common\etc\pesdb"
    and then delete the file named "CompetitionEntry.bin"
    now run the game and you will find all the leagues in your game
    I have done this several times and it worked !!

    ReplyDelete
    Replies
    1. how to complete installation got "cannot create the following file: \smoke\gold win_dat\common\series\final 6.2 ect\teamcolour.$$A"

      Delete
    2. just ignore the error message and click exit then delete the mentioned file after installing all the files.

      Delete
  23. Fix the installer error please !

    ReplyDelete
  24. hi keeps asking for password to run rar extracts

    ReplyDelete
  25. Why national teams have dummy player ? how to fix it

    ReplyDelete
  26. Can the download please be simplified! This 10-part download method is nonsense. It is very frustrating to hop from one link/page to another whilst dealing with advertising and pop-ups along the way...all in vain. Can someone tell me how the heck to download this patch. What am I missing here?

    ReplyDelete
  27. My pes2014 keep say pes2014 stopped working after select theteam. Please help.

    ReplyDelete
  28. Is there a renewal of the stadiums???????????

    ReplyDelete
  29. This comment has been removed by the author.

    ReplyDelete
  30. Please can you solve this??? ! c:\extract\SMOKE PATCH 6.2\SMoKE_2014_v6.2.part09.rar: CRC failed in the encrypted file SMoKE Datapack v6.2.exe (wrong password ?)

    ReplyDelete

 

Copyright @ 2017 Smoke Patch.

Designed by Templateiy & CollegeTalks